DIC Degasser Module - EF-G2-B

DIC Degasser Module - EF-G2-B - This is the original DIC degasser that suitable for a series Canon and Fujifilm printers. This is the original Canon Degasser for Arizona printers (3W3010117489)

Specifications:

• Size : 115 mm x Ø 30 mm (4.53 in x Ø 1.18 in)
• Weight : approximately 27g (0.06 lb)
• Materials:
  • Hollow fiber : Poly (4-Methylpenten-1)
  • Housing : Polypropylene
  • End cap : Polypropylene
  • Sealing resin : Epoxy resin
  • O-ring : EPDM
• Surface area of membrane: Approximately 0.06 m2 (0.65 ft2)
• Performance of module (with water):
  • Treated water DO: Less than 0.2 kPa (0.002 bar, 0.029 psi) (Under test conditions)
  • Pressure drop: Less than 0.2 kPa (0.002 bar, 0.029 psi) (Under test conditions)
  • Flow rate : 0.5 - 180 ml/min
• Use conditions:
  • Liquid temperature: 5-45°C (41-113 °F)
  • Maximum liquid pressure (Gauge) : 200kPA (2bar, 29psi)
  • Vacuum pressure (absolute):
    • Aqueous liquid: Saturation vapor pressure ~100kPa (1 bar, 14.5 psi)
    • Non-aqueous liquid: 1 kPa~100kPa (1bar, 14.5 psi)
  • Operating temperature: 5~45 °C (41~113 °F)
• Use/Storage conditions: Keep dry in door with temperature under 45 °C (113 °F). Handle with care. Do not expose to sunlight. Do not freeze remaining water in a module after used for any purpose.
• Connecting joint: 
  • Water inlet/outlet : NPT 1/8
  • Vacuum port: NPT 1/8

Compatibilité Imprimante:
Canon Océ Arizona 6160 XTS, Canon Océ Arizona 6170 XTS, Fujifilm Acuity F66, Fujifilm Acuity F67