Description
This original set of 5 blades is suitable for Roland cutting plotters and printers. These blades have a cutting angle of 17° and an offset value of 0.25mm. These standard blades are suitable for cutting sandblast stencils for friction feed with a maximum thickness of 1mm. This is the original Roland part (number ZEC-U1715 also called ZEC-A1715).
Printer compatibility:
Roland BN-20, Roland CJ-540, Roland CM-12, Roland CM-24, Roland CM-300, Roland CM-400, Roland CM-500, Roland CX-12, Roland CX-24, Roland CX-300, Roland CX-400, Roland CX-500, Roland FJ-500, Roland FJ-540, Roland FP-740, Roland GR2-540, Roland GR2-640, Roland GS-24, Roland GX-24, Roland GX-300, Roland GX-400, Roland GX-500, Roland GX-640, Roland LEC-300, Roland LEC-300a, Roland LEC-330, Roland LEC-540, Roland LEF-12, Roland LEF-20, Roland LEJ-640 / LEJ-640FT, Roland PNC-1860, Roland RA-640, Roland RE-640, Roland RS-540, Roland RS-640, Roland SC-540, Roland SC-545ex, Roland SG-300, Roland SG-540, Roland SJ-1045ex, Roland SJ-540, Roland SJ-645ex, Roland SJ-745ex, Roland SP-300, Roland SP-300i, Roland SP-300v, Roland SP-540i, Roland SP-540v, Roland VG-540, Roland VG-640, Roland VP-300, Roland VP-300i, Roland VP-540, Roland VP-540i, Roland VS-300, Roland VS-300i, Roland VS-420, Roland VS-540, Roland VS-540i, Roland VS-640, Roland VS-640i, Roland XR-640
Bank Transfer
