Norprene Tube ID 2.3mm, OD 3.9m (10m)

This Norprene tube is suitable for Mutoh and Roland solvent pumps.This tubing has an inner diameter of 2,3 mm and an outer diameter of 3,9 mm. It has an extended durability thanks to superior chemical resistance. It was developped specially for peristaltic pumps as it is also very flexible. This tube is 10 meter long (1m of tubing is needed for one pump).

Technical Specifications
- Tensile Strength psi (MPa): 1,000 (6.9)
- Ultimate Elongation: 375%
- Tear Resistance lb-f/inch (kN/m): 120 (21)
- Water Absorption in 24 hrs. @ 23 ̊C: < 0,01%
- Maximum Recommended Temperature, ̊F ( ̊C): 165 (74)
- Length: 10m

Compatibilité Imprimante:
Mutoh Blizzard 65, Mutoh Blizzard 90, Mutoh RJ-8000-50 (Falcon II), Mutoh RJ-8000-64 (Falcon II), Mutoh RJ-8000-87 (Falcon II), Mutoh Rockhopper 3 65, Mutoh Rockhopper 3 90, Mutoh Rockhopper 3 Extreme 65, Mutoh Rockhopper 3 Extreme 90, Mutoh Rockhopper II 50, Mutoh Rockhopper II 64, Mutoh Rockhopper II 87, Mutoh Rockhopper II-2H, Mutoh Rockhopper II-4H, Mutoh Spitfire 65, Mutoh Spitfire 90, Mutoh Viper 65, Mutoh Viper 90, Mutoh Viper Extreme 65, Mutoh Viper Extreme 90, Mutoh Viper TX 65, Mutoh Viper TX 90, Mutoh Viper TX Extreme 65, Mutoh Viper TX Extreme 90, Roland FJ-52, Roland FLJ-300, Roland SC-500, Roland SC-540, Roland SC-545ex, Roland SJ-1000, Roland SJ-1045ex, Roland SJ-500, Roland SJ-540, Roland SJ-600, Roland SJ-640, Roland SJ-645ex, Roland SJ-740, Roland SJ-745ex, Roland SP-300, Roland SP-300v, Roland SP-540v