A 200 microns thick, durable silicone material with a matte finish and a soft touch. CAD-CUT® Silicone 3D -200- is ideal for medium and small cutting details. Due to its blocking features, ideal for prints on sublimated polyester.
- Material: Silicone
- Thickness: 200µm
- Finishing: Mat
- Colours: 7
- Elasticity: Stretchable
- Carrier: Sticky backing
- Cutting details: Small to medium
- Cutting blade: 45°
- PVC Free
- Available in: 50cm x 25m rolls
- 100% cotton
- 100% polyester *
- Poly/cotton blends
* Always test before manufacture.
You should always test cut prior to any production run. Remember cutter settings will need to be adjusted as your blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1.5mm (1/16”) for lettering & logos.
- Temp: 150°c
- Time: 10 seconds
- Pressure: Medium
- (#4-6 on Hotronix®)
- Peel: Cold
- Reprint 05 seconds
CAD-CUT® Silicone 3D -200- is not recommended for multilayered applications.
Machine wash warm up to 60°c mild detergent. Do not use bleach.
Dry at a normal dryer setting on household machines. Do not dry clean.
Can be directly ironed onto.
Store in a cool, dry area.
Avoid direct heat, sunlight and humidity.
- Reusable Cover Sheet or Grip Cover Sheet