Descripción
DIGIMEDIA Monomeric Microperforated Window Graphic R140
A one-way vision film for glass. The printed side faces out and reads as a solid graphic; from inside, the 1.5 mm perforations let you see through and daylight in. The face is a white gloss monomeric calendered PVC of 150 microns with a black reverse for contrast, on a clear removable solvent-based adhesive that comes off glass without residue at the end of the campaign. The R140 in the name is the liner weight, a heavier 140 g/m² backing that keeps the perforated face flat and dimensionally stable through printing and laminating, feeds smoothly through the printer without curling or edge lift, and supports the precision of the 1.5 mm perforations so the hole pattern stays clean and consistent across the roll.
Developed for solvent, eco-solvent and UV-curable printing on wide-format printers. Thanks to its specially engineered liner, the film prints cleanly with virtually any ink, without the banding or blotchy, uneven dot fill around the perforation holes that other perforated films on the market can show. Use the correct print profile and let prints dry for 48 hours before laminating; the film must be laminated with an optically clear overlaminate to close the perforations and protect the print outdoors.
Why DIGIMEDIA? Premium construction and performance at a competitive price.
Benefits:
- One-way vision: full-colour graphic outside, clear view and daylight inside
- Removable adhesive for clean removal from glass
- Black reverse for strong contrast and privacy
- Excellent printability with solvent, eco-solvent and UV inks, with clean, even ink lay around the perforations thanks to the specially engineered liner
- R140 heavyweight 140 g/m² liner: keeps the perforated face flat through printing and laminating, feeds without curling, and holds the perforation pattern precise across the roll
- 150 micron monomeric film, easy to handle and apply on flat glass
- Competitive price for short-term campaigns
Applications:
- Retail and storefront window advertising
- Vehicle rear and side window graphics
- Privacy and sun-screening graphics for offices and showroomsShort-term promotions and event graphics on glass
- Bus shelters and glazed street furniture
Available sizes:
- DVMPMG14042 - DIGIMEDIA Monomeric Microperforated Window Graphic R140 - 1060 mm x 50 m
- DVMPMG14054 - DIGIMEDIA Monomeric Microperforated Window Graphic R140 - 1372 mm x 50 m
- DVMPMG14060 - DIGIMEDIA Monomeric Microperforated Window Graphic R140 - 1520 mm x 50 m
Technical specifications:
- Substrate: white gloss perforated monomeric PVC, black reverse
- Thickness: 150 microns (± 10%) • Perforation: 1.5 mm holes
- Adhesive: clear, removable, solvent based
- Adhesion (FINAT FTM1, steel): > 5.8 N/25 mm after 20 min, > 7.8 N/25 mm after 24 h
- Liner: 140 g/m² PE coated two-layer art board paper
- Application temperature: above 10 °C
- Service temperature: -10 °C to 70 °C
- Durability: up to 1 year, laminated, vertical application
- Shelf life: 12 months in original unopened packaging, stored vertically
- Storage: 20 °C ± 5 °C and 50% ± 5% relative humidity, dry and clean, away from direct sunlight and heat
- Drying time: minimum 48 hours after printing, unrolled, before lamination
- Application surface: flat, clean glass. Not for floors, flexible or low-energy substrates, non-flat surfaces, walls, wallpaper or rough, unclean or degraded surfaces
- Country of origin: Product of the European Union
Transferencia bancaria
