Description
This highly scratch resistant, high gloss, 450g polyester adhesive film is a great alternative to printed glass. It can be laminated on white boards, fine art prints, kitchen back splashs, posters and photo-realistic digital prints to simulate glass. This laminating film can be used together with DIGIMEDIA Blockout 415g self-adhesive vinyl to create long lasting kitchen and bathroom back splash.
Features & benefits:
- High gloss scratch resistant surface
- High abrasion resistance
- Single-sided self-adhesive "glass" polyester film
- Washable and resistant to various cleaning agents and solvents
- Made with an ageing-resistant acrylate adhesive
- PVC free
- Suitable for cold lamination
- Optimised dimension stability
Technical specifications:
- Film thickness: approx. 250 µm
- Composition: hardened, high gloss polyester film
- Basic weight: approx. 450 g/m²
- Surface: Smooth
- Glossiness: 60º/85º C
- Adhesive: Solvent-based, clear, permanent acrylic adhesive
- Adhesive thickness: 28 g/m²
- Adhesion (Glass/25mm): 10min. ≤ 1500 24h ≤ 1620
- Liner: 20 µm PET film
Processing instructions:
- When laminating on inkjet prints, they must be fully dried. A drying time of 24 hours is recommended
- It is recommended not to cut the laminated material immediately after the lamination process. Leave it for 24 hours to allow that the adhesive bonds to the print substrate
- Optimal working condition during processing is 15° - 30°C and a relative humidity of 30% - 50%.
Additional information:
- Temperature resistant, up to 100°C
- The material surface can be cleaned with standard cleaning agent
- We recommend using cotton cloth for cleaning purposes
- Resistant to grease splashes and vapour
- The use of a solvent-free silicone is recommended to seal the edges
- Shelf-life :12 months
Size: 1270 mm x 30 m
Bank Transfer
